GE remote codes are numeric sequences used to program universal remotes to operate various devices such as TVs, DVD players, sound systems, and more. These codes allow a single remote to control multiple electronics, eliminating the need for separate remotes for each device. To use them, you typically enter the code corresponding to your device brand into the universal remote, enabling full functionality like power, volume, and input controls. GE remote codes are widely available online and in manuals, making it easy for users to quickly set up and enjoy seamless control over their home entertainment systems.
Common GE Remote Codes for TV and DVD Players
When you set up a GE universal remote, the most common devices you’ll be programming are your TV and DVD player. Below are some of the general GE remote codes for popular TV and DVD brands.
GE Remote Codes for TVs
- Samsung: 004, 010, 015, 017, 019
- Sony: 005, 020, 010, 011, 013
- LG: 001, 003, 004, 007, 008
- Vizio: 015, 017, 020, 022, 029
- TCL: 003, 004, 014, 015, 016
- Sharp: 020, 021, 030, 040, 050
GE Remote Codes for DVD Players
- Samsung DVD: 051, 052, 055, 060, 078
- Sony DVD: 017, 018, 024, 036, 056
- LG DVD: 019, 033, 042, 054, 062
- Panasonic DVD: 027, 038, 050, 060, 078
- Vizio DVD: 017, 029, 040, 061, 073
These codes are just a few examples. You should consult your GE remote’s manual for the full list of compatible codes, and remember that they can vary slightly based on the model of your device.
How to Enter a GE Remote Code
Entering a GE remote code is simple. Follow these steps:
- Turn on the Device: Make sure the device you want to control (TV, DVD player, etc.) is turned on.
- Press the Setup Button: On your GE remote, press and hold the “Setup” button until the red indicator light stays on. Release the Setup button after the light stays on.
- Enter the Code: Using the number pad, enter the 3-digit code for your device (from the list provided in your manual or online). The red indicator light will blink and then turn off.
- Test the Remote: Point the remote at the device and press the “Power” button. If the device turns off, the code is correct, and the setup is complete. If it doesn’t, repeat the process with a different code.
Troubleshooting GE Remote Code Errors
If you experience any issues when entering GE remote codes, don’t worry—there are simple solutions. Here’s how to troubleshoot common errors:
- Check the Code: Double-check that you’ve entered the correct code for your device. Refer to your remote’s manual to confirm the code.
- Ensure the Device is Powered On: The device you’re trying to control needs to be powered on before entering the code. Make sure the TV or DVD player is on before starting the programming process.
- Re-enter the Code: If the remote didn’t work after the first try, enter the code again carefully. Sometimes, errors can happen during the code entry.
- Use the Auto-Search Function: If the manual method doesn’t work, use the auto-search feature to find the right code.
What to Do If GE Remote Code Doesn’t Work?
If the GE remote code doesn’t work, you can try the following:
- Try Different Codes: If the first code doesn’t work, try entering the next code in the list for your device. There are often multiple codes for each brand, and one of them should work.
- Auto-Search: If you don’t have a list of codes or you’re having trouble with the manual entry, use the auto-search function. This feature is built into most GE remotes and can help you find the right code automatically.
- Check the Batteries: Sometimes, the issue may not be with the code but with the batteries in your remote. Replace the batteries and try programming again.
- Reset the Remote: If all else fails, reset the remote to its factory settings and start over with the code entry process.
Why Does Your GE Remote Code Not Work?
There are several reasons why a GE remote code might not work:
- Incorrect Code: The most common issue is simply entering the wrong code. Make sure to consult the manual for the exact code for your device.
- Compatibility Issues: Some newer models of devices may not be compatible with older GE remotes. In such cases, check for software updates or use the auto-search feature to find the code.
- Interference: Other electronic devices, or even strong sunlight, can interfere with the signal between the remote and the device. Try moving the remote closer to the device or reduce the number of obstacles between them.
- Weak Batteries: If the remote is not sending a strong enough signal, the device may not respond to the code. Replace the batteries and try again.
How to Reset GE Remote and Re-enter Codes
If you need to reset your GE remote and start over, follow these steps:
- Press and Hold the “Setup” Button: On your GE remote, press and hold the “Setup” button until the red indicator light stays on.
- Enter the Reset Code: Enter the code 9-8-1 using the number pad. The red light will blink and then turn off.
- Re-enter Your Device’s Code: After resetting, you can begin reprogramming your device by following the steps in the “How to Enter a GE Remote Code” section.
GE Remote Codes for Popular Brands
Below are some common GE remote codes for popular brands.
Samsung
To program your GE remote to control a Samsung TV or device, use these codes:
- 004, 010, 015, 017, 019
GE Remote Codes for Samsung Devices
If you’re trying to program a GE remote for a Samsung DVD player, use these codes:
- 051, 052, 055, 060, 078
GE Remote Codes for Vizio TVs
Vizio TVs are widely used, and their GE remote codes are as follows:
- 015, 017, 020, 022, 029
How to Program Your GE Remote with Multiple Devices
Programming your GE remote to control multiple devices is easy. Simply follow the steps to program each device one by one. After each programming step, test the remote to ensure it controls the device as expected. Once you’ve programmed all the devices, your GE remote should be able to control all of them seamlessly.
The Bottom Line
In conclusion, programming your GE remote doesn’t have to be a complicated task. With the right codes and a few simple steps, you can quickly set up your remote to control all your devices. Whether you’re working with a TV, DVD player, or other devices, this guide has provided you with all the essential information to make the process easy. Remember to keep your GE remote’s user manual handy for quick access to code lists, and don’t hesitate to use troubleshooting tips if needed.
With this guide, you should now have a better understanding of GE remote codes, how to find them, and how to resolve common issues. Happy remote programming!