6 steps to adjust a standard door closer

6 steps to adjust a standard door closer

Do you want to explore the steps to adjust the standard door closer? If yes, then take a look at this blog and go through 6 steps and learn more about door stopper floor. In general, a door closer is the most effective mechanical device that can close the door automatically after it gets open. 

It consists of more components like adjustable tension screw, back check valve and spring loaded arm. If you open the door, the spring loaded arm pulls the shut once again when the back check valve and tension screw is adjusting according to the force required to open & close the door. 

A door closer is the most essential part of the building. It is a must for you to keep it in proper working condition. For that, you need to check out its working condition regularly. There are many problems that can occur if the door closers are not properly adjusted. 

The door may slam shut or could not close completely. In certain cases, the door can also swing open. The door sometimes could not open wide enough and hence it became very difficult to enter & exit. If your door closer is not adjusted properly, then sure it can also damage the door and the frame & floor around the door. 

Required tools to adjust the standard door closer:

Take a look at below and explore the required tools to adjust the standard door closer:

  • Wrench
  • Head Screws
  • Flathead Screwdriver
  • Lubricant (if necessary)

Procedure to adjust the door closer:

Suppose you find that your door is not properly closing or opening or making any noise, then the door closer must need to be adjusted. It will take some time. Follow the below mentioned 6 steps to adjust the standard door closer. 

  • Remove door closer cover

The first step in adjusting the door closer is removing its cover. Based on the type of the door closer, use the suitable tools or screwdriver to remove the cover. The cylindrical closers come with the head screws. But the other types of door closers only need you to push the cover away from the housing. 

It is very essential to consider components or screws inside before removing the cover. It is mainly since, you can once again place it back after replacement. After removing the cover and considering the internal elements, proceed further with the adjustments based on your preferences. 

  • Close the valve

At first, you must consider the sweep valve since that can affect how slowly or quickly the door gets closed and adjusts from there incrementally. Before turning other knobs, you must start closing the valves on the door closer. 

It can ensure there is no additional pressure getting into the system and can also prevent from getting damaged. Using the lubricant is the right choice to make the door closer to operate very smoothly and increase its lifespan. 

This process is very unique according to the type of door closer that you are working with. Hence it is very essential to focus on product documentation details before completing the adjusting task. 

  • Backcheck adjustment

A backcheck is the best feature that is installed on door closers to avoid doors from opening fast. A door that opens fast can hurt people a lot. Here backcheck adjustment is required to loosen the screw that connects to the wall. For that you need to use the flathead screwdriver to avoid damaging the other parts of the door closer. 

Now you need to turn the cylinder next to when there is a resistance while swinging open the door. Once again you need to tighten everything with the same screwdriver for correct tension before testing. Adjusting the backcheck can enhance the flexibility of the door closer and find the right balance among energy efficiency, security, longevity and ease of access. 

  • Sweep or main speed adjustment

Adjusting the sweep or main speed of the door closer is very essential to find out how slow or fast the door is moving while closing. You can make it possible by turning the helical screw on the top of the door closer to the body. The swing speed increases when you turn it in a clockwise direction. It will get slower if you turn it in anti-clockwise. 

Don’t adjust it very high, when there is a child in your house, since it can cause injuries to them. Test to speed and find whether it is according to the user preferences or local regulations.

  • Latching speed adjustment

Go through the manufacturer instructions to adjust the latching speed. You can find the detailed steps in the instruction manual and find how to handle the process according to the model and make the door closer. 

Adjust the small screws at the bottom that are close to the particular location that affects the latching function. You need to concentrate more on this process by turning the single screw in one direction and confirm everything works fine.

  • Conduct door testing

Door testing is very essential while doing door closer adjustment. You must start the testing by manually closing the door and watch how the closer arm directly interacts with the track. It can help you explore if there is any need of tension to adjust and also find the amount of closer pressure required for secure closure. 

The door will never close properly when there is more tension on the door. If there is not enough tension, then the door will slam shut. It is best to observe the process and take the necessary decision by conducting regular door testing. 


From the above mentioned scenario, now you have explored the steps to adjust the door stopper. So without further delay, you can start adjusting the door closer and simplify the usage of doors very effectively. When your door closes properly, then sure no intruders can break your door and enter your place. Hence it is better to do necessary adjustments regularly.