Installing a toilet bowl appears straightforward, but crucial steps are involved so that it might require some attention, from area preparation to securing the toilet bowl, each step actively works toward ensuring a lack of leaks and smooth operation. If you prefer to leave the work to a professional, a toilet bowl installation service can be utilized or hired.
Tools and Materials Required
One must have the necessary equipment and materials when installing a ceramic toilet bowl. Preparing these would guarantee no delay in the process and ensure the task goes smoothly. The required materials include a ceramic toilet bowl replacement, wax ring, toilet nuts and bolts, adjustable wrench, screwdriver, and plumber clay. Furthermore, having a level will ensure that a precise installation has been carried out. Visit https://www.pshomemaintenance.com/plumbing-services/ to get professional plumbing services so you don’t waste time installing the toilets.
Step 1: Prepare the Area
Begin by shutting off water access to the toilet and draining the existing tank and bowl. If the bowl is being replaced, unscrew the bolts that secure it to the floor. A wax ring or debris lying beside the flange needs to be removed to ensure a firm seal around the new toilet.
Step 2: Install the New Wax Ring
A wax ring is crucial as it helps save your bathroom bowl from leaking.
- Position the Ring: Place the wax ring on the toilet flange. Ensure it is in the middle to avoid a loose seal when the toilet bowl is attached.
- Check for Fit: Depending on the height of your toilet flange, some toilets might need a thicker or thinner wax ring.
- Press Gently: After it has been set in position, gently press the wax ring into the flange instead of applying strong force.
Step 3: Fit the Toilet Bowl on the Brush
Now that the wax ring is intact let’s attach the toilet bowl by setting it on the flange. Try lowering the wax round ring in the toilet’s center to the bolts mounting on the floor. While firming the wax ring, ensure that the toilet bowl level is adequately set around it.
Step 4: Fix the Toilet Bowl on the Toilet Base
Once the toilet bowl is placed correctly, use an adjustable wrench to fix the nuts installed on the bolts. Apply pressure to the base and give the bowl a tight up-and-down gentle motion and check if it is stable.
Step 5: Attach Water to the System Again
Moving on to the next step, securely fit the water supply into the toilet tank and fill the valve at the bottom. Make sure the water pipe is fixed firmly to tighten the bond. Allow the water to flow and fill the tank while looking for smooth functioning near the toilet’s base.
Step 6: Leak Testing and Adjustments
At this stage, the primary task is to monitor for any leakage along the scrub edge. Suppose water collects at the bottom of the bathroom, indicating that the wax ring has not been outfitted nicely. In this case, the toilet needs to be uninstalled, a wax ring geared up, and then the toilet reattached. The screws for the toilet can be adjusted as required so all the bolts fit well and a good seal is made.
Step 7: Final Assembly
Once it is hooked up and there are no leaks inside the lavatory, the toilet seat with a lid can be positioned on the bowl. Ensure alignment is correct and everything can be locked in place. Also, a thin line of silicone can be placed around the foot of the toilet, making it more secure and tidy.
